![]() In core-type transformer, the windings are given to a considerable part of the core. According to the design, transformers can be classified into two: 1. The types of transformers differ in the manner in which the primary and secondary coils are provided around the laminated steel core. For a frequency of 50 Hertz, the thickness of the lamination varies from 0.35mm to 0.5mm for a frequency of 25 Hertz. The lamination can be done with the help of a light coat of core plate varnish or lay an oxide layer on the surface. By effectively laminating the core, the eddy-current losses can be reduced. For this to happen, the steel should be made of high silicon content and must also be heat treated. The steel should have high permeability and low hysteresis loss. In all transformers that are used commercially, the core is made out of transformer sheet steel laminations assembled to provide a continuous magnetic path with minimum of air-gap included. In order to insulate and to bring out the terminals of the winding from the tank, apt bushings that are made from either porcelain or capacitor type must be used. The device will also need some suitable container for the assembled core and windings, a medium with which the core and its windings from its container can be insulated. The two coils are insulated from each other and from the steel core.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |